SMART VIBE SERIES LINEUP

The Smart Vibe Ring (SVR) items consist of a vibrator attached to a silicone ring for use in partnered play and during sex.
The ring can be stretched around the penis and placed at the base of a shaft for vibrations during sex, or it can be used as a vibrator by simply holding the item.

The SVR one features a newly engineered C-ring that allows you to attach or remove the item even during use, allowing for more freedom and pleasure in the moment.

Yes! There is a warranty period.

SVR/SVR+ : 6 months from the date of purchase SVR one : 3 months from the date of purchase

Please contact us here should you have any inquiries regarding defective items.

Please note that we require a receipt, proof of purchase, or completed warranty page from the item user manual to process defective item inquiries. The warranty does not cover damage incurred through improper use.

The SVR+ is a little larger, with a new motor that is 1.5x stronger than the original SVRs, along with 2 new vibration patterns and deeper vibration overall. The two products also come with different charging cables; the original SVR with a Charging Cable, and the SVR+ with a compact USB Charger.

The SVR one is a battery operated product, with only a single vibration strength. It also has a C-shaped ring, to be easily attached or removed during use.

Length of Vibrator

– SVR: 3.54″

– SVR+: 3.82″

– SVR one: 3.39″

※Ring diameter remains 1.22″

※The Charging Cable of the original series can be used with the SVR+, and the USB Charger of the SVR+ can be used with the original series.

While the ring is stretchable, overstretching can cause the ring to become disfigured or remain overstretched.

The SVR and SVR+ are both rechargeable items, while the SVR one is battery operated.

– SVR: Running Time: Approx. 60min (Full Power) Charging Time: Approx. 60min (5V 1A)

– SVR+ Running Time: Approx. 40min (Full Power) Charging Time: Approx. 60min (5V 1A)

– SVR one Running Time: Approx. 60 min. (when using the 2 tester batteries provided)

The port on the SVR and SVR+ products are not the same as common USB Cables, and were made specifically for the SVR and SVR+.

If you have lost or broken the USB Charger (SVR+) or USB Cable (SVR) then please contact us here.

The SVR one is battery operated and does not use a charging cable.

Please use a USB port on your computer, or use an AC Adapter if you have one available.

※Please only use adapters with 5V1A output.

<Warning>
■ Do not wash the SVR under hot water, boil, or immerse in washing detergents for extended periods of time.
■ Use only neutral or mild soap. Soaps high in acid or alkaline content may damage product material.
■ Do NOT wash with acidic or alcoholic cleansers, as this may cause disfiguration and discoloration of the device.
■ Please ensure the product is completely clean and dry before storing to help avoid mold and other build-up.

Yes, you can!

You can also use the USB Charger that comes with the SVR+ to charge the original SVR series items, and vice versa.

Simply press and hold the power button to turn ON. Press and hold again to turn OFF.

Both the SVR and SVR+ offer multiple vibrations strengths and pulse patterns. The SVR one has a single vibration mode.
Cycle through the modes by pressing the power button once the item is ON.

– SVR:
Low > Med > High > Pulse 1 > Pulse 2

– SVR+:
V1 (Low) > V2 > V3 > V4 > V5 (High) > Pulse 1 > Pulse 2 > Pulse 3

– SVR one
ON/OFF

Yes! Both the SVR and SVR+ (including both items’ charging ports!) are fully waterproof up to 50cm, for use in water and easy washing. After washing and allowing the item to fully dry, store them in their included cases to keep them clean.

<Warning>

■ Do not charge the item near water sources, or submerge the item while it is charging.

■ Do not use in depths over 50cm, in strong water flow, or in water other than tap/bath water.

Please wash the items with cold or tepid water. If there is any noticeable dirtiness on the item, please use a neutral, mild soap. Note that the charging port of the SVR/SVR+ is rust-proof and can withstand the above washing procedures.

<Warning>

■ Do not wash the item under hot water, boil, or immerse in washing detergents for extended periods of time.

■ Use only neutral or mild soap. Soaps high in acid or alkaline content may damage product material.

■ Do NOT wash with acidic or alcoholic cleansers, as this may cause disfiguration and discoloration of the device.

■ Please ensure the product is completely clean and dry before storing to help avoid mold and other build-up.

※Do NOT wash the USB Charger or USB Cables as these parts are not waterproof.

Only water-based lubricants should be used with SVR Series.

■ Please refrain from using silicone-based lubricants, oils such as baby oil or other non-water based lubricants with the SVR Series items. These may cause disfiguration, discoloration or defects in the device.

The SVR and SVR+ are made of body-safe silicone, and are waterproof for hygienic cleaning.
The exposed charging port is also waterproof and rust-proof. There is no danger of electric shocks from the USB port.
The SVR one is made from TPE, and is also waterproof for hygienic cleaning.
Please note the SVR series are for external use and are not medical items, so internal use is at the risk of the user.

– SVR
Body: Silicone, ABS, Li-ion Battery
Travel Case: PP

– SVR+
Body: Silicone, PC, ABS, Li-ion Battery
Travel Case: PP
USB Charger: PVC

– SVR one
Body: TPE

Waste separation and recycling will differ according to region, so please refer to your local guidelines for further details on how to dispose of battery-powered items, and items made with the materials listed above.